会刷奥迪的MMI 3G+隐藏菜单的应该都MMI的开始菜单是可以修改的，比如从A4刷成S4
Change MMI 3G splashscreen…
Enable through the “hidden menu”:
- navigate to ‘car/carcodingvehicle’
- choose the model of choice in ‘configuration line’
- select ‘Update Splashscreen’
- restart MMI
实际上除了默认的几种之外还有自定义的办法。
http://www.audiworld.com/forums/a6-c7-platform-discussion-194/vagcom-change-splash-screen-2895633/page3/
所需要的文件下载地址:
http://a4-klub.pl/index.php?/topic/308367-skrypty-dla-mmi-3g-basic-low-high/
It is designed to customie the MMI splashscreen on the 7" MMI 3G systems ONLY.
Please confirm your MMI system details here:
https://en.wikipedia.org/wiki/Multi_Media_Interface
I simply translated the comments and updated the menu images used in the script.
I have successfully run this on my 2011 Q5 with MMI 3G (details below) with
no adverse affects.
Software Verison: HNav_US_P0114_D1
DB Version: 8R0060884P NAR 5.4.7
Hardware Version: 9307
Please use at your own risk. I cannot guarantee results!
AUDI MMI 3G HIGH CUSTOM SPLASHSCREEN INSTRUCTIONS
- Unzip .zip file and copy contents of the “Copy_Contents_to_SD” directory to a FAT32 formatted SD card.
- Create a custom splashscreen in .PNG format with 800x480 dimensions with 24-bit color depth.
- Copy custom splashscreen to /splashscreens directory on SD card.
At this point, the contents of the SD card should look like this:
[_screens]
scriptDone.png
scriptStart.png
[_utils]
DecodeScript
hd
pax
reboot
showScreen
sqlite3
sysctl
[backup]
[splashscreens]
[splashscreens]
startup_generic.png
copie_scr.sh
run.sh
- Remove any SD cards from slots SD1 or SD2.
- Turn on ignition.
- Wait 2-3 minutes until the MMI system is fully booted.
- Insert SD card into SD1 and wait for the “scriptStart.png” menu image to display.
- Press the center control knob button to continue.
- Wait until the script completion menu image “scriptDone.png” appears.
- Press the center control knob button again.
- Wait at least 1 minute then reset the MMI system using procedure below:
To Reset the MMI system:
Press and hold down the SETUP button, the center control knob button and the top right select button simultaneously until the MMI system shuts down. Release keys to reboot the MMI system.
To really confirm that the script has run, insert the SD card back into your computer and view the contents. You should see a “.done” file in the root directory on the SD card. This indicates the script ran successfully. If you only see a “.started” file, then the script ran but did not complete. Chances are there is something wrong with the .png file or the script was interrupted. You should also see the original splashscreens backed up into the /backup/splashscreen directory.
SD Card Contents After Successful Run:
[_screens]
scriptDone.png
scriptStart.png
[_utils]
DecodeScript
hd
pax
reboot
showScreen
sqlite3
sysctl
[backup]
[splashscreens]
startup_generic.png
startup_rs.png
startup_rs6.png
startup_s.png
startup_s4.png
startup_s5.png
startup_s6.png
[splashscreens]
startup_generic.png
copie_scr.sh
run.sh
.done
NOTE: Any dealer-initiated firmware flash will revert these changes! You will need to run this script again.
NOTE: This procedure is different than changing the splashscreen in the hidden menu.
[Hidden menu] [car] [carcodingvehicle]
Choose the model of choice in ‘configuration line’
Select ‘Update Splashscreen (according car line)’
